Spare parts

This padded strap replaces the strap on the HP Velotechnik hand support. It closes with a hook-and-loop fastener.Technical detailsColourBlackIncludedStrap without LEHASB support plateManufacturer part numberLEHAHB

This replacement pad for the HP Velotechnik hand support uses a breathable layered material. A hook-and-loop backing holds it in place.DetailsOrder quantity: 1 pieceManufacturer part number: LEHAPO

This quick-release clamp makes a suitable HP Velotechnik standing aid easier to fit and remove.DetailsInternal diameter: 25.4 mmManufacturer part number: LTKS254SS

The HP Velotechnik BodyLink is a shell seat with an EVA seat pad. This complete version includes long mounting plates for shorter riders.Technical detailsSeat padEVA foamMounting platesLong, 4 cm forward offsetManufacturer part numberSIHPBL2KKS

This upper section replaces the corresponding shell of the HP Velotechnik BodyLink seat. Hook-and-loop tape is fitted; the seat pad and mounting hardware are not included.DetailsPosition: Upper sectionManufacturer part number: SIHPBLOK

This lower section replaces the corresponding shell of the HP Velotechnik BodyLink seat. Hook-and-loop tape is fitted; the seat pad and mounting hardware are not included.Technical detailsPositionLower sectionSeat designFrom approx. 01/2010Manufacturer part numberSIHPBLU2K

This two-part Airflow seat pad is intended for the HP Velotechnik BodyLink seat design from around January 2010.Technical detailsSeatBodyLink from approx. 01/2010VersionAirflow, two-partManufacturer part numberSAAFBL2

This two-part EVA foam seat pad is intended for the HP Velotechnik BodyLink seat design from around January 2010.Technical detailsSeatBodyLink from approx. 01/2010VersionEVA foam, two-partThickness14 mmFasteningLoop tapeManufacturer part numberSASHBL2

This mounting plate secures the HP Velotechnik BodyLink seat at the stated position.DetailsPosition: UpperManufacturer part number: SIBLBAO

This mounting plate secures the HP Velotechnik BodyLink seat at the stated position.DetailsPosition: MiddleManufacturer part number: SIBLBAM

This mounting plate secures the HP Velotechnik BodyLink seat at the stated position.Technical detailsPositionLowerSeat designFrom 01/2010Manufacturer part numberSIBLB2U

This long mounting plate secures the HP Velotechnik BodyLink seat at the stated position. The long version moves the seat forwards by 4 cm.Technical detailsPositionUpperForward offset4 cmManufacturer part numberSIBLBAOL

This long mounting plate secures the HP Velotechnik BodyLink seat at the stated position. The long version moves the seat forwards by 4 cm.Technical detailsPositionMiddleForward offset4 cmManufacturer part numberSIBLBAML

This long lower mounting plate moves the BodyLink seat forwards by 4 cm. It is intended for the seat design from January 2010 and helps adjust the seat position for shorter riders.Technical detailsPositionLowerVersionLongForward offset4 cmSeat versionFrom 01/2010Manufacturer part numberSIBLB2UL

Headrest pad for adjustable headrest SIHPKSV for BodyLink headrestmade of mesh material

The HP Velotechnik ErgoMesh Premium lets you adjust the seat base and backrest angles independently.Technical detailsVersionErgoMesh PremiumBackrest height63 cmSeat depth24 cmSeat width41 cmBackrest adjustment range14°Seat base adjustment range11°Manufacturer part numberSIKONXIncluded equipmentComplete seat with seat cover and OrthoFlex inserts; prepared for Add-on Bags.

The HP Velotechnik ErgoMesh Premium HS lets you adjust the seat base and backrest angles independently. The HS version raises the seating position by 11 cm compared with the standard model.Technical detailsVersionErgoMesh Premium HSBackrest height63 cmSeat depth24 cmSeat width41 cmBackrest adjustment range14°Seat base adjustment range11°Seating position11 cm higher than standard ErgoMesh PremiumManufacturer part numberSIKONXHCompatibilityThe HS version must not be used on the Scorpion fs 26 S-Pedelec (SFE).Included equipmentComplete seat with seat cover and OrthoFlex inserts; prepared for Add-on Bags.

The HP Velotechnik ErgoMesh Premium XL lets you adjust the seat base and backrest angles independently. The XL version has a wider, longer seat base and a taller backrest.Technical detailsVersionErgoMesh Premium XLBackrest height66 cmSeat depth27 cmSeat width46 cmBackrest adjustment range14°Seat base adjustment range11°Manufacturer part numberSIKONXLIncluded equipmentComplete seat with seat cover and OrthoFlex inserts; prepared for Add-on Bags.

The HP Velotechnik ErgoMesh Premium HS XL lets you adjust the seat base and backrest angles independently. The XL version has a wider, longer seat base and a taller backrest. The HS version raises the seating position by 11 cm compared with the standard model.Technical detailsVersionErgoMesh Premium HS XLBackrest height66 cmSeat depth27 cmSeat width46 cmBackrest adjustment range14°Seat base adjustment range11°Seating position11 cm higher than standard ErgoMesh PremiumManufacturer part numberSIKONXHLCompatibilityThe HS version must not be used on the Scorpion fs 26 S-Pedelec (SFE).Included equipmentComplete seat with seat cover and OrthoFlex inserts; prepared for Add-on Bags.

This cover replaces the cover on an HP Velotechnik ErgoMesh Premium or ErgoMesh Premium HS seat. OrthoFlex inserts are included.Technical detailsVersionStandardEquipmentPrepared for Add-on BagsManufacturer part numberSIZUBZEP

This cover replaces the cover on an HP Velotechnik ErgoMesh Premium XL or ErgoMesh Premium HS XL seat. OrthoFlex inserts are included.Technical detailsVersionWide / XLEquipmentPrepared for Add-on BagsManufacturer part numberSIZUBZEPL

Orthoflex ErgoMesh inserts for ErgoMesh seats, 1 complete set, for individual upholstery

ErgoMesh Premium seat plate for mounting on the backrest

The HP Velotechnik ErgoMesh is a mesh seat.Technical detailsVersionErgoMeshIncludedSeat with coverManufacturer part numberSIKONE2